PC Router Sederhana Debian Woody 4

tahapnya...

1. Instalasi Operating System Linux Debian Woody 4
2. Ip addressing
#nano /etc/network/interface
auto eth0
allow-hotplug eth0
iface eth0 inet static
address 172.26.78.19
netmask 255.255.255.224
network 172.26.78.0
broadcast 172.26.78.31
gateway 172.26.78.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 124.81.116.2
dns-search smartlinkgm.net

auto eth1
iface eth1 inet static
address 192.168.10.1
netmask 255.255.255.0
broadcast 192.168.10.255
3. Setting Iptables
#iptables -A PREROUTING -t nat -j REDIRECT -p tcp -s 192.168.10.0/24 -d 0/0 --dport 80 --to-ports 8080 (apabila sudah ada squid)
#iptables -t nat -A POSTROUTING -o eth0 -s 192.168.10.0/24 -j MASQUERADE (belum ada squid)
#iptables -t nat -A POSTROUTING -o eth0 -s 192.168.10.0/24 -j MASQUERADE
#iptables-save > /etc/iptables.conf
#echo "iptables-restore < /etc/iptables.conf" >> /etc/network/if-up.d/iptables
#chmod 755 /etc/network/if-up.d/iptables
4. Setting ip forward
#nano /etc/sysctl.conf
net.ipv4.conf.default.rp_filter=1
net.ipv4.ip_forward =1
net.ipv4.conf.default.forwarding=1
net.ipv6.conf.default.forwarding=1
#sysctl -p /etc/sysctl.conf -A (untuk merestart ip forward)
#sysctl -A|grep forward
5. Setting Squid
#apt-get install squid
setelah itu configure di
#nano /etc/squid/squid.conf
yang di konfigure antara lain
http_port 3128 transparent
our_networks 192.168.10.0/24 (di sesuaikan dengan network kita)
#/usr/sbin/squid -k reconfigure (restart squid)
untuk mengetest squid
#tail -f /var/log/squid/access.log
6. restart
# /etc/init.d/networking restart
Reconfiguring network interfaces...done.
Ok Jadilah sebuah PC Router sederhana, konfigurasi seperti diatas sudah cukup aman dan secure..
Tambahan bisa juga router diatas di forward menjadi sebuah proxy... Dengan mengubah sedikit di script, squidnya..